dell t3600 sas controller driver windows 10

Locate the SAS/RAID setting and select 'Disable'. However, you may want to select 'Yes' to completely remove the drivers.) When asked to uninstall the drivers, you can select 'No'. Right Click on the device and select Uninstall device. Open Device Manager and Uninstall the Intel C600 Chipset SAS RAID Controller which can be found in the 'Storage Controllers' tree. Only perform the following if you are in a Non-Raid configuration.Īs always, make backups, clone your hard drive, etc., before attempting the following: Again I want to stress if you are configured in a RAID array, do NOT perform the following procedure, you will lose data. Before you remove hard drives, some configuration work must be performed. In my case, there was an extra SATA data and power cable available. The primary OS drive can be unplugged from the SAS/RAID bay and plugged into one of the two SATA ports. The SATA ports are not part of the SAS/RAID controller.

My motherboard also contains two SATA headers: SATA_0 and SATA_1. If your system is setup with the 'Non-Raid' configuration, please read on. My system was not using a RAID array, both of my hard drives were configured as 'Non-Raid'. SAS_0 is used to control the 4 built-in hard drive bays in the computer case. My motherboard contains two SAS headers: SAS_0 and SAS_1. If your motherboard has a SATA port, please read on. This method simply bypasses the RAID Controller on the motherboard. I have found a workaround that allows Windows 10 Update to work on motherboards with an Intel C600 Chipset SAS RAID Controller. Solution For Windows 10 Update | Intel C600 Chipset SAS Raid Incompatibility

Dell t3600 sas controller driver windows 10